Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

Odyssey Gyro G3 Upper Cables
$7.99
- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.
Odyssey High Pressure Rim Strips
$8.00
When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.
Odyssey MPEGs Steel Pegs
$20.00
- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)
GSport Van Pegs
$16.99
GSport's new steel pegs are Van Homan approved. It features three rotation positions and are reinforced internally for longer life. Sold Individually. TECHNICAL SPECIFICATIONS - Material: Heat Treated 4140 - Length: 108mm / 4.25" - Diameter: 39mm / 1.5" - Configuration: 14mm or 3/8" - Rotation Positions: 3 - Weight: 213 grams / 7.5oz
Odyssey Air Supply Inner Tube
$10.00
Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher quality tube will always last longer than a cheap tube during comparable everyday use.
Odyssey Bluebird Chain
$19.99
For our Bluebird chain, Odyssey took the proven and reliable KMC 510-HX chain and added a permanently attached, factory installed half-link to one end. When the chain is trimmed to size you can easily decide whether or not to use the half-link. Original factory assembled pin joints are radically stronger than workshop assembled ones, so this is a huge benefit.
Odyssey Broc Raiford Signature Grips
$9.99
Broc Raiford can bunnyhop over a house so it’s only right that he has his own grips to hold on to. Broc’s signature grip comes in at 160mm in length and features rope detailing on the ends to tie in with Broc’s nautical theme.
Odyssey La Guardia Socket Drive/Spline Drive Sprocket
$69.99
A total redesign of Odyssey's popular MDS sprocket. With a built-in full guard, this sprocket lives up to its name, helping to protect your chain from anything you can throw at it. Sprocket thickness increases towards the guard area for greater strength. Compatible with all chain widths. The supplied adapter allows these otherwise Socket Drive sprockets to double as 19mm Spline Drive as well. FEATURES - 7075 Aluminum - 25 or 28T INTERFACE OPTIONS - StandardSocket Drive (Black Only) - Spline Drive (with 19mm Adapter, Black Only)
Odyssey Mid Bottom Bracket
$24.99 - $35.00
- Made to fit crank spindles and press-fit Mid BB frames. - Simple and easy to install. - Includes an assortment of spacers to optimize chainline and crank clearance. - Odyssey 6061-T6 aluminum dust spacer included.
Odyssey Springfield Brakes
$23.00
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield brake drops the two ordinary (and confusing) brake springs and replaces them with one central spring that applies the same force to each arm, requiring no additional adjustment. This makes assembly incredibly easy–just bolt it on and go. The brake arms are designed to maximize stiffness and save weight without adding excessive cost. By die-casting the arms and using shared tooling to make each side, the Springfield meets all of the original design goals, resulting in a very powerful and affordable brake.
Odyssey Cable Knarps
$3.99
- Sold in pairs. - Allen wrench included.
Odyssey Twisted PC Pedals
$13.99 - $16.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
Wheels Manufacturing Inc. Derailleur Hanger 146
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x8 Flat Head Screws - Specialized Part #9890-4226 Note: This hanger has been updated to match Specialized Part #9890-4226 and will accommodate 28-tooth and larger cassette cogs. Shifting with smaller cassette cog ranges will not be adversely affected.
Jagwire Road Pro Brake Kit
$35.00
Road Pro Brake kits offer enhanced performance and style. Designed to work with and match Jagwire's Pro Shift kits, the Pro polished brake cables combined with their Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Road Pro Brake kits are easy to install. - Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance - All parts needed for a complete brake cable and housing install on road bikes are included - Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes
Origin8 Torq Lite Single Speed Cog
$20.00
A range of sturdy, affordable cogs is an essential part of a single speeder's quiver. Origin-8's Torq Lite Single Speed Cog is available in wide range of sizes so you can easily tailor your gearing for the terrain. It's designed for Shimano/SRAM style cassette bodies, features a wide, flex-free base, and is made from hardened chromoly steel.
Jagwire Universal Sport Brake Cable Kit
$21.99 - $25.99
Jagwire's Universal Sport Brake Cable Kits are the perfect way to enhance your braking performance while adding a little style to your bike, too. Compatible with both mountain and road brakes, the slick stainless cables provide smooth, powerful braking. And with the housing and all the needed parts included, these cable kits are easy to install and ready to deliver years of smooth positive braking.
Jagwire Universal Sport Shift Cable Kit
$21.99 - $27.00
Jagwire's Universal Sport Shift Kits are the perfect way to enhancing shifting performance and precision and add style to your bike, too. Compatible with Shimano, SRAM, and Campagnolo systems, the slick stainless cables provide smooth, precise shifts, excellent durability and corrosion resistance. And with the housing and all the needed parts included, these kits are easy to install and ready to deliver years of flawless gear changing.
Shimano SLX Shadow + Rear Derailleur (Mid Cage)
$100.00
SLX has always been Shimano's workhorse group: seriously solid performance, reasonable weight and all-mountain toughness. Well, this M675 version gets some trickle down features from XTR that are bound to make trail riders rejoice. This Shadow Plus derailleur retains the tucked-in Shadow profile that makes you less likely to tag it on trailside obstacles. And the Plus part is a one-way clutch that dramatically stiffens up the cage so chain slap, dropped chains, and all the associated noise are basically a thing of the past. It all adds onto SLX's legendary workhorse status.
Jagwire Mountain Pro Brake Cable Kit
$34.99 - $38.49
Jagwire's Mountain Pro Brake Cable Kit is the perfect way to upgrade your braking while adding some style to your bike, too, since it comes in many colors. The kit provides everything needed to replace your Shimano or SRAM mountain bike brake cables including Jagwire's super-smooth Teflon-coated cables and compression-resistant Kevlar-reinforced housing for dramatically improved braking performance. You'll also love that this kit is much lighter than what you had on your bike before. Plus, with all the small parts included in the kit it's easy to install.
Fabric Scoop Elite
$84.99
Fabric's Scoop saddle is designed to provide flexibility and great ergonomic feel for all genres of cycling. Starting with their unique flexible base, vacuum bonded upper, and custom design rail, the Fabric Scoop is proven to be the perfect balance of comfort, performance and simplicity. Wide choice of colours & specification -The Scoop is versatile. A regular ‘Best in Test’ winner, it is available in a wide range of specifications and colours to suit the needs and budget of every kind of rider. 3 rider profiles -Choose the Scoop to suit. There are 3 profiles of Scoop saddle; Flat for a more aerodynamic riding position, Shallow for all-day performance and Radius for a more upright, comfort focused position. Durable & flexible -Our unique 3 part bonding process not only results in super comfort but also an easy to clean saddle with smooth lines and superb durability. -Width: 142mm -Length: 282mm -Base: Nylon -Rail: Hollow Cro-moly -Upper: Lightweight PU foam -Cover: Waterproof microfibre
Fabric Scoop Pro
$209.99
Fabric's Scoop saddle is designed to provide flexibility and great ergonomic feel for all genres of cycling. Starting with their unique flexible base, vacuum bonded upper and custom design rail, the Fabric Scoop is proven to be the perfect balance of comfort, performance and simplicity. Available in three profiles and four specifications. Wide choice of colours & specification -The Scoop is versatile. A regular ‘Best in Test’ winner, it is available in a wide range of specifications and colours to suit the needs and budget of every kind of rider. 3 rider profiles -Choose the Scoop to suit. There are 3 profiles of Scoop saddle; Flat for a more aerodynamic riding position, Shallow for all-day performance and Radius for a more upright, comfort focused position. Durable & flexible -Our unique 3 part bonding process not only results in super comfort but also an easy to clean saddle with smooth lines and superb durability. - Width: 142mm - Length: 282mm - Base: Nylon-fibre matrix - Rail: Carbon-fibre 7mm x 9mm - Upper: Lightweight PU foam - Cover: Waterproof microfibre
iSSi Cleat Set
$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. • 4 degrees of float both inward and outward
Zipp Tangente Cork Brake Pads
$40.00
Zipp's Tangente Cork Brake Pads are perfect for Zipp wheels with carbon braking surfaces. They are made of a composite cork polymer for consistent brake response and to reduce glazing from the intense heat caused by braking on carbon. As a result, the Tangente cork pads avoid the brake pulsation produced by residue buildup from rubber pads and can even eliminate pulsation from rims with previous buildup. These pads have a unique shape with more material in the front to improve durability and shed water. Although the composite material wears similarly to low-temperature rubber compounds, the Tangente cork pads last longer than most rubber carbon-specific pads because of the shape and 0.5 mm greater overall thickness.
Wheels Manufacturing Inc. 31.8 – 25.4 Handlebar Shim
$14.00
Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black
Wheels Manufacturing Inc. Chainstay Protector - Wide
$6.00
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
Wheels Manufacturing Inc. Derailleur Hanger 13
$20.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws
Wheels Manufacturing Inc. Derailleur Hanger 172
$30.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 180
$29.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 21
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 25
$25.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Page 1 of 17 Next page